CAREERS AT STC

View our current Vacancies below

NIGHT SHIFT
HGV TECHNICIAN
HYDE

PANEL MAN
ATHERTON

PARTS/ADMIN
ASSISTANT
ATHERTON

CLASS 1 HGV DRIVER
HAYDOCK

HGV TECHNICIAN
HAYDOCK

WORKSHOP FOREMAN
HAYDOCK

WORKSHOP FOREMAN
NIGHTSHIFT
HAYDOCK

Night Shift HGV Technician - Hyde

Required to work in busy HGV/Trailer workshop, previous experience is essential. Must be

conversant with current working methods, including MOT Preparation. Vehicle and Trailer

diagnostics. Work to include carrying out service and maintenance of predominantly HGV

but also Trailers and LGV.

 

Experience of on-site inspections and attending breakdowns preferable.

HGV 1 licence is preferable but not essential

Required licence or certification:
Driving Licence

 

Hours to be discussed at interview

 

Hourly rate is between £14.00 and £16.00 dependent on experience

Job Location:

Hyde

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com directly

Panel Man - Atherton

 

 

Tasks will include repairs to body panels, fabrication works, welding. The ability to do prep work and any strip / fitting will be favourable.

 

 Varied Duties Including:

 Body Repairs

 Fabrication

 Strip/fit

 Prepping

 Efficient and conscientious worker

 Abilities or qualification in welding (MIG) essential.

 Carry out re-chassis work and light fabrication work.

 Good housekeeping routines to meet H&D requirements.

 Ensure all paperwork is completed to a high standard.

 Utilise all Personal Protective Equipment as necessary.

 to communicate effectively with the Workshop Manager.

 Duties to include the use of hand tools, pistol drills, riveters, MIG welders, and Oxy - Acetylene torches.

 

Alongside the above roles you will be required to get involved with other aspects of the repairs as required including general workshop duties.

 

Ideally have full clean licence but not essential.

 

Hourly rate between £11 and £13 dependent upon experience

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com directly

Parts/Admin Assistant - Atherton

 

We are currently seeking to recruit a Commercial Vehicle Parts Assistant/Service Administration Assistant to work at our Atherton Depot. As an Assistant Parts/Admin person you will be required to liaise with customers, parts suppliers and work colleagues to assist and ensure LGV and commercial vehicle paint and panel repairs are carried out efficiently and correctly. You will be responsible for assisting with the smooth running of the Parts Department and the administration for the depot.

 

The business requires a high standard of work and customer care must be first class. Attention to detail and excellent organisation skills are essential qualities for this key role within the Depot.

 

      The role will involve the following but not limited to:

  • Identifying parts
  • Pricing parts
  • Adding parts to estimates with mark up
  • Ordering parts - ensuring that the parts are available for the job at the correct time
  • Checking parts
  • Ensure parts used are booked out accurately to the job.
  • Returning Parts promptly if not required.
  • Checking and keeping on top of consumables stock
  • Checking and keeping on top of paint stock
  • Raising PO numbers
  • Chasing invoices for WIP
  • Setting up accounts
  • Raise job cards as required and updating jobs on the system in an accurate and timely fashion.
  • Ensure job cards are completed and signed correctly.
  • Review system status reports to ensure no job has missed being completed.
  • Update job times for fitters for each job worked on from clock cards.
  • Liaise with customers regarding scheduling and completion of work.
  • Update customers regarding any extra authority required and forwarding estimates as required.
  • Answering the telephone and dealing with queries.
  • Assisting with costing of the jobs.
  • Promote Health and Safety within the depot.
  • Act in a professional manner at all times.
  • Undertake any reasonable duty specified by the Depot Manager.

    Ideally hold a full clean driving licence.

Mon to Fri 8am to 5pm, working out of these hours along with some Saturdays will be required as the business dictates

Hourly pay – national minimum wage

Job Type: Full-time

 

Job Location:

Atherton

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com directly

Class 1 HGV Driver - Haydock

 

 

A position has arisen at our busy Haydock branch for a Class 1 driver, preferably from within the Service & Maintenance sector. Based in our busy workshop, the successful candidate will be required to collect and deliver customers vehicles / trailers and take for MOT and re-tacho. How to run a vehicle / trailer through its MOT is desirable but not essential.

Must be able to work under own initiative, and as part of a team. Also expected to maintain a clean appearance. The applicant is responsible for keeping our tractor units clean both inside and out

 

Must be able to maintain the excellent level of service our customers have come to expect.

 

Clean Driving Licence required.

 

Strong work ethic and professional attitude.

 

Mon to Fri 6am to 4pm, working out of these hours along with some Saturdays will be required as the business dictates

Hourly pay – between £9.00 and £10.00 dependent on experience

Job Type: Full-time

 

Job Location:

Haydock

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com and
juliegreen-buckley@stc-uk.com directly

HGV Technician - Haydock

 

Required to work in busy Trailer/HGV workshop, previous experience is essential. Must be conversant with current working methods, including MOT Preparation & Trailer and Vehicle diagnostics.

Work to include carrying out service and maintenance of predominantly trailers but also HGV and LGV.

Experience of on-site inspections and attending breakdowns preferable.

 

HGV 1 licence is preferable but not essential.

 

Mon to Fri 8am to 6pm, some Saturdays will be required as the business dictates

Hourly rate is between £12 and £13 dependent on experience

Job Type: Full-time

 

Job Location:

Haydock

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com and
juliegreen-buckley@stc-uk.com directly

Workshop Foreman - Haydock

 

Job Purpose:

To assist Depot / Service Manager to manage and develop the Service Department, provide technical support to staff and customers. To ensure that maximum utilisation and quality is achieved from the workshop and customer satisfaction is achieved.

To ensure that repairs and services to vehicles are carried out efficiently and to the highest possible standard.

 

 

Responsibilities:

•To correctly interpret instructions from the job card/repair orders, to follow all documented quality procedures and to ensure that Service Technicians comply with repair instructions and stipulated settings and tolerances from manufacturer manuals bulletins check sheets etc.

•To obtain and record any necessary technical information by following documented procedures.

•To analyse and report the training needs of allocated staff.

•To allocate, and supervise all work done to ensure the highest possible standard of workmanship and efficiency as per industry guidelines, in order to ensure the maximum utilisation of time available. To ensure that Service Technicians are qualified to do the work allocated.

•To ensure that work is completed by the times required and report any likely delays to the service receptionist / customer as early as possible.

•To check and test vehicles and work, as required by documented procedures.

•To ensure that work done and tests carried out are accurately reported and recorded and to immediately report any further work required or vehicle faults, as laid down in documented procedures.

•To advise the service reception / customer of any parts delays or extra parts required. To order agreed parts from the appropriate supplier.

•To ensure that all displaced parts are immediately clearly identified and / or placed in quarantine areas, as required by documented procedures.

•To ensure that Customers and the Company’s property are protected.

•To ensure that the workshop is kept in a clean and tidy condition and all scrap, etc. is removed immediately upon completion of each repair.

•To maintain own appearance and manner in order to present the best possible image to Customers.

•To accurately report and record work done and tests carried out and to immediately report any further work required or vehicle faults.

•To protect and maintain all tools and equipment by only using them in the prescribed manner and returning them to their place of storage immediately after use. To immediately report any loss, shortage, damage or malfunction of tools and equipment or if any additional tools or equipment are required to complete the repair.

•To carry out tests and checks as necessary on completed work

•To provide information, maintain records and carry out all duties in an accurate, efficient and timely manner.

•To undertake such other tasks as may reasonably be required.

•To maintain discipline and security in the workshop and good working relationships with other staff and Customers.

•To enhance the image and reputation of the company whilst supporting its commercial interests.

•To comply with good health and safety practice, all statutory requirements, company policies and standard procedures.

•To achieve all company & personal KPI’s & maintain focus on all company financial objectives within given responsibilities.

 

Required competencies:

•Technical knowledge

•Attention to detail

•Ability to multitask

•Problem solving

•Organisational and administration skills

•Excellent interpersonal skills

•Ability to build rapport with all internal staff and customers

•Able to supervise and manage staff

 

Required experience:

•Technical apprenticeship

•Minimum of 1-2 years experience in a similar role

•1 – 2 years previous people management experience in a similar environment

 

Specific knowledge:

•In-depth knowledge of the truck industry

•Apprenticeship

 

HGV Class 1 licence would be of a benefit but is not essential

Hours Mon to Fri 6am to 4pm, alternate Sat 8am to 12pm

Hourly rate dependent upon experience (£14-£16)

Job Type: Full-time

 

Job Location:

Haydock

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com and
juliegreen-buckley@stc-uk.com directly

Workshop Foreman (Nightshift) - Haydock

 

Job Purpose:

To assist Depot / Service Manager to manage and develop the Service Department, provide technical support to staff and customers. To ensure that maximum utilisation and quality is achieved from the workshop and customer satisfaction is achieved.

To ensure that repairs and services to vehicles are carried out efficiently and to the highest possible standard.

 

 

Responsibilities:

•To correctly interpret instructions from the job card/repair orders, to follow all documented quality procedures and to ensure that Service Technicians comply with repair instructions and stipulated settings and tolerances from manufacturer manuals bulletins check sheets etc.

•To obtain and record any necessary technical information by following documented procedures.

•To analyse and report the training needs of allocated staff.

•To allocate, and supervise all work done to ensure the highest possible standard of workmanship and efficiency as per industry guidelines, in order to ensure the maximum utilisation of time available. To ensure that Service Technicians are qualified to do the work allocated.

•To ensure that work is completed by the times required and report any likely delays to the service receptionist / customer as early as possible.

•To check and test vehicles and work, as required by documented procedures.

•To ensure that work done and tests carried out are accurately reported and recorded and to immediately report any further work required or vehicle faults, as laid down in documented procedures.

•To advise the service reception / customer of any parts delays or extra parts required. To order agreed parts from the appropriate supplier.

•To ensure that all displaced parts are immediately clearly identified and / or placed in quarantine areas, as required by documented procedures.

•To ensure that Customers and the Company’s property are protected.

•To ensure that the workshop is kept in a clean and tidy condition and all scrap, etc. is removed immediately upon completion of each repair.

•To maintain own appearance and manner in order to present the best possible image to Customers.

•To accurately report and record work done and tests carried out and to immediately report any further work required or vehicle faults.

•To protect and maintain all tools and equipment by only using them in the prescribed manner and returning them to their place of storage immediately after use. To immediately report any loss, shortage, damage or malfunction of tools and equipment or if any additional tools or equipment are required to complete the repair.

•To carry out tests and checks as necessary on completed work

•To provide information, maintain records and carry out all duties in an accurate, efficient and timely manner.

•To undertake such other tasks as may reasonably be required.

•To maintain discipline and security in the workshop and good working relationships with other staff and Customers.

•To enhance the image and reputation of the company whilst supporting its commercial interests.

•To comply with good health and safety practice, all statutory requirements, company policies and standard procedures.

•To achieve all company & personal KPI’s & maintain focus on all company financial objectives within given responsibilities.

 

Required competencies:

•Technical knowledge

•Attention to detail

•Ability to multitask

•Problem solving

•Organisational and administration skills

•Excellent interpersonal skills

•Ability to build rapport with all internal staff and customers

•Able to supervise and manage staff

 

Required experience:

•Technical apprenticeship

•Minimum of 1-2 years experience in a similar role

•1 – 2 years previous people management experience in a similar environment

 

Specific knowledge:

•In-depth knowledge of the truck industry

•Apprenticeship

 

HGV Class 1 licence would be of a benefit but is not essential

Hours Tues to Fri 6pm to 6am

Hourly rate dependent upon experience (£15-£16)

Job Type: Full-time

 

Job Location:

Haydock

If you would like to apply for this role please click Enquire and attach your CV and cover letter to the email.

 

Alternatively, email emmaporter@stc-uk.com and
juliegreen-buckley@stc-uk.com directly

Follow our social media!

© 2019 Stockport Truck Centre Ltd

One stop commercial vehicle solutions